Product Parameters

Item	DX-2000HA	DX-2200HA	DX-2500HA
Number of Electrodes	20	22	24
Max.Mesh Width	2000mm	2500mm	3000mm
Wire Diameter	4.0-8.0mm	4.0-8.0mm	4.0-8.0mm
Max. Mesh Length	6m	6m	6m
Cross Wire Space	50-250mm	50-250mm	50-250mm
Line Wire Space	100-250mm	100-250mm	100-250mm
Line Wire Feeding Way	Coil Wires
Cross Wire Feeding Way	Pre-cut wires or Coil wires.
Pulling Mesh way	By servo motor
Pulling Mesh Way After Cutting Mesh	By Fast Speed Pulling Mesh
Welding Transformer	160KVA*5	160KVA*6	160KVA*6
Welding Speed	50-70 times/min	50-70 times/min	50-70 times/min
Control System	PLC Control and Touch Screen

Product Description

Automatic Feeding Wire Width Of Mesh 2.5m Reinforcing Mesh Welding Machine

Introduction of Reinforcing Mesh Welding Machine:

The reinforcing mesh welding machine takes the inverter motor as the main power, the cylinder is pressurized, and the inverter runs at zero speed when the upper and lower motor is pressed and welded, and maintains a constant torque of 150% to ensure the pressure on the steel bar during welding. The drawing and feeding parts use servo motor and precision reducer to move back and forth on the linear guide rail and rack track. PLC centralized control touch screen for man-machine communication interface, convenient for users to adjust various data. The welding machine is economical and practical, and the maintenance cost is low in the later period, which is well received by the majority of customers.

Features of Reinforcing Mesh Welding Machine:

1. The control system adopts synchronous CNC technology, Mitsubishi or Panasonic PLC program and HMI. The reinforcing mesh welding machine operation is more intelligent and reasonable.

2. The control cabinet adopt touch screen and keyboard, you can change welding time and cross wire hole mesh size through touch screen. And has language in English.

3. The cross wires are fed from the hopper device automatically and is controlled by step motor.The stepper motor drives the disk-type device to drop wires automatically. The store device has more capacity can load max 1.5tons rebar.

4. Adjustable distance of longitudinal wire that allows different opening size between the line wire, when input the distance of cross wire to computer, any mesh opening can be reach. Welding mesh hole size can adjust randomly within range.

5. The air cylinder adopts famous pneumatic brand, making the service life long.

6. Mesh pulling system is controlled by servo-motor that adopts elastic tension and opening positioning mesh, which improves precision of mesh opening size.

7.The reinforcing mesh welding machine equips with 12 pieces of typical and efficient water-cooling welding transformers, 160KVA*12PCS (24 pcs of water cooling welding electrodes) ——every two welding electrodes need a water cooling welding transformer.

8. Low-voltage electrical appliances are made of Schneider, well-known brands to ensure the efficient and stable operation of the equipment.

9. The machine will stop working automatically if there is no cross wires in hopper device.

10. When there is malfunction on the machine, the PLC will alarm, which is convenient to adjust the machine.

11. The cross wire space adjustment adopts PLC micro-computer control, set on the touch screen.Very easy and convenient to operate.

12. The mesh pulling system is automatically calculated in cycle.No need manual setting. The mesh pulling car can be back to origin automatically after finishing the pulling mesh.

13. Wire feeding way:The longitudinal wires and cross wires should be pre-straightened and pre-cut. The longitudinal wires should be inserted into the slot tunnel by manual or inserted into the wire feeding car first, then send by Panasonic servo motor.

14. Automatic falling mesh panel device and mesh conveyor is adopted, so it save much labor to move the mesh panels.

Technical Parameetrs of Reinforcing Mesh Welding Machine:

1. The control system adopts synchronous CNC technology, Mitsubishi or Panasonic PLC program and HMI. The machine operation is more intelligent and reasonable.

2. The control cabinet adopt touch screen and keyboard, you can change welding time and cross wire hole mesh size through touch screen. And has language in English.

3. The cross wires are fed from the hopper device automatically and is controlled by step motor.The stepper motor drives the disk-type device to drop wires automatically. The store device has more capacity can load max 1.5tons rebar.

4. Adjustable distance of longitudinal wire that allows different opening size between the line wire, when input the distance of cross wire to computer, any mesh opening can be reach. Welding mesh hole size can adjust randomly within range.

5. The air cylinder adopts famous pneumatic brand, making the service life long.

6. Mesh pulling system is controlled by servo-motor that adopts elastic tension and opening positioning mesh, which improves precision of mesh opening size.

7,The machine equips with 15 pieces of typical and efficient water-cooling welding transformers, 160KVA*15PCS (30 pcs of water cooling welding electrodes) ——every two welding electrodes need a water cooling welding transformer.

8. Low-voltage electrical appliances are made of Schneider, well-known brands to ensure the efficient and stable operation of the equipment.

9. The machine will stop working automatically if there is no cross wires in hopper device.

10. When there is malfunction on the machine, the PLC will alarm, which is convenient to adjust the machine.

11. The cross wire space adjustment adopts PLC micro-computer control, set on the touch screen.Very easy and convenient to operate.

12. The mesh pulling system is automatically calculated in cycle.No need manual setting. The mesh pulling car can be back to origin automatically after finishing the pulling mesh.

13. Wire feeding way:The longitudinal wires and cross wires should be pre-straightened and pre-cut. The longitudinal wires should be inserted into the slot tunnel by manual or inserted into the wire feeding car first, then send by Panasonic servo motor.

14. Automatic falling mesh panel device and mesh conveyor is adopted, so it save much labor to move the mesh panels.

Applications of Reinforcing Mesh Welding Machine:

The reinforcing mesh is mainly used in municipal bridge and highway bridge deck pavement, old bridge deck transformation, pier crack prevention.

The reinforcing mesh welding machine takes the inverter motor as the main power, the cylinder is pressurized, and the inverter runs at zero speed when the upper and lower motor is pressed and welded, and maintains a constant torque of 150% to ensure the pressure on the steel bar during welding.